Motorcycle Parts And Accessories - Hot StuffWe Bring You The Best! writer: Jordan Mastagni
Biltwell Exhaust Kit Biltwell (951) 699-1500 www.biltwellinc.com
The new Exhaust Kit from Biltwell comes with five header flange sets-ten flanges total-for the following H-D motor styles: Evolution, ironhead, panhead, shovelhead, and STD. In addition, every Biltwell Exhaust Kit includes two pinch tips, two 16-inch-long straight sections, two 2-1/2-inch radius U-bends and two 3-1/2-inch radius U-bends-more than enough 1-3/4-inch O.D. 16-gauge tubing to fabricate a set of custom pipes for your motorcycle | 
Drag Specialties Reusable Filters Drag Specialties (800)222 - 3400www.dragspecialties.com
The new air filters from Drag Specialties are washable and reusable, and they are designed with a durable epoxy-coated wire mesh to maximize airflow and provide peak filtration. The outer urethane body won't crack or curl like rubber. Inside you'll find four layers of surgical-grade cotton for high-flow filtration. | 
Belt Drives Ltd. Ball Bearing Lock Up Clutch Belt Drives Ltd. (714) 685-3333 www.beltdrives.com
The new Ball Bearing Lock Up Clutch from BDL is meant to lighten clutch pull at the lever while providing slip-free lock up. Each unit incorporates a designated number of steel ball bearings set in a model specific diaphragm assembly. Replacing the factory pressure plate and springs, stock applications use the factory diaphragm spring and associated hardware. The new ball bearing diaphragm design provides lighter lever control and more positive lock up. | 
Ekstensive Metal Works Flatboy Trailer Ekstensive Metal Works (281) 442-1050 www.ekstensivemetalworks.com
The new Flatboy trailers from Ekstensive Metal Works come equipped with a battery, air compressor, air storage tank, valves, switches, and an air gauge. With the push of a button you can go from ride height to setting the trailer flat on the ground when loading and unloading your bike. Three switches let you control each wheel and the trailer's tongue for uneven loads. The dual needle gauge allows you to monitor the air pressure in both the bags. | 
Crystal-Glo Spray Polish Crystal-Glo Manufacturing (800) 263-0887 www.crystal-glo.com
Crystal-Glo's new Spray Polish produces an instant "wet" look. The spray-on, wipe-off formula maintains that "just polished" look to your motorcycle. It cleans scuffs, marks, oily fingerprints, and fresh surface contaminants. Frequent use in between polishing refreshes shine and protection. Okay for all paints, clear coat, chrome, fiberglass, smooth plastic, polished metal, aluminum, perspex, mirrors, and glass. | 
H-D Heat Fuel TankHarley-Davidson (800) 443-2153 www.harley-davidson.com
The new 4.5-gallon Heat fuel tank for Sportsters from Harley-Davidson replaces the original equipment tank with a custom-painted version for the single-color front and rear fender. This Color Shop Personal Accents design features fanned flames that flow over the fuel tank. The tank is available in three color combinations: Vivid Black and Fire Red Pearl, Vivid Black and Silver, and Vivid Black and Deep Cobalt. It fits 2007 XL models. See dealer for fitment details. | 
George's Garage 5- and 6-speed Main Drive Gear & Bearing Kit Tool George's Garage (909) 843-7043 www.georges-garage.com
The 5- and 6-speed Main Drive Gear & Bearing Kit Tool is designed to remove and install the main drive gear on 5-and 6-speed transmissions including TC88 A and B models through 2006. It also will remove and install the main drive gear bearing in the trans case. Aluminum parts are polished and anodized bright red. Steel parts are done in black oxide, and come with hardware. | 
CruzTools Roadtech H3 Kit CruzTools (888) 909-8665 www.cruztools.com
The RoadTech H3 combines two kits: the EconoKIT H1 tool kit and MiniSet MSHD1 ratchet and socket set. It includes five combination wrenches (3/8-inch, 7/16-inch, 1/2-inch, 9/16-inch, and 10mm), an 8-inch adjustable wrench, locking pliers, tire pressure gauge, three-LED flashlight, five hex and three Torx keys, 6-in-1 screwdriver, spark plug socket, electrical tape, spark plug gap gauge, WD-40, thread locker, mechanic's wire, and cable ties. The centerpiece of the socket set is a 1/4-inch-drive ratchet with 48 teeth for very small rotational increments, plus four sockets (3/8-inch, 7/16-inch, 1/2-inch, and 10mm) and a 2-inch extension. Contents are housed in a double panel polyester roll-up pouch. CruzTools products are guaranteed for life. | 
Bondhus Drivers Bondhus (800) 328-8310 www.bondhus.com
The Bondhus screwdriver handle core is molded from durable plastic and provides a comfortable feel in the hand even after long periods of use. A slightly cushioned feel prevents fatigue and improves grip. Handle and blade torque are matched to prevent breaking the tip. Bondhus screwdriver handles, up to 3/16-inch, can generate a screw's full recommended seating torque. The texture covering the handle provides grip, even when hands are wet or oily. | 
Baker Drivetrain F6F Baker Drivetrain (877) 640-2004 www.bakerdrivetrain.com
The new F6F for the '07 H-Ds is now available from Baker Drivetrain. It features helical-cut diamond ground gears, wider bearings, an 1/8-inch thick bearing retainer plate, and a billet aluminum bearing door. All this combines to give you the advantage of a quieter fifth gear and no clutch lever walking. | 
Scott Plourde's Speed and Precision Cycles Blade Frame Scott Plourde's Speed & Precision Cycles (603) 627-3930 www.scottplourde.com
The Blade Frame from Scott Plourde was inspired by the movie Blade. The Blade frame has a 7.5-inch lowered seat height, oil in-frame, 7-inch stretch, and 48-degree rake. The frame includes a swingarm, six eccentric adjusters, a rear axle, two SPC covers, and hardware. | 
Storz XR Street Tracker Seat Kit Storz (805) 641-9540 www.storzperf.comThe new Storz XR Street Tracker seat kit gives Sportster owners a way to achieve the dirt track look. Designed for '04-'07 Sportster 883 & 1200 models, this dirt track style seat and pad kit features a fiberglass seat base in white gelcoat finish, and a Saddleman seat pad contoured to match the shape of the stock gas tank (except Custom tank). A seat mounting subframe kit provides attachment points for the seat base, stainless steel license plate holder, and taillight, which are included in the kit along with complete instructions and mounting hardware. |
Discuss in Our Forums
|
|