Can't Go Wrong With a Classic
Paughco (775) 246-5738 http://www.paughco.com
Paughco's classic Fishtail slip-on mufflers are now available in lengths of 31 and 18 inches without baffles for 1-3/4-inch pipes. Finished in chrome, the mufflers measure 1-7/8 inches in diameter, produce a distinctive exhaust note, and are a classic touch to any chopper or custom cruiser project.
A "Big" Collaboration
Tribal Motorworks (231) 932-5454
http://www.tribalmotorworks.com
The Tribal Motorworks' Big Johnson velocity stacks are available in three different styles, which fit S&S Super D, E or G carbs, as well as Mikuni 42 and 45mm carburetors. Initially inspired by Clay Johnson, the velocity stacks design was then refined by the Tribal Motorworks staff. The stacks are CNC-machined billet aluminum and are available in polished or anodized finish.

H-D Style Under the Summer Sun
Harley-Davidson (800) 588-2743
http://www.harley-davidson.com
Harley-Davidson MotorClothes' Crossroad Mesh Jacket is a lightweight nylon mesh jacket constructed for maximum airflow and ventilation. Although designed for warmer weather, the black jacket still has protection in mind with body armor pockets at the shoulders and elbows. It also features adjustable waist and wrist tabs, hand-warmer pockets, reflective piping, a H-D graphic on the left side of the chest, and a highly reflective, large Harley-Davidson graphic on back. Sizes for the Crossroad Mesh Jacket are XS-3XL.

Add Some Get-Up 'N' Go!
S&S Cycle (608) 627-1497
http://www.sscycle.com
Wake up the performance of a stock bike with an S&S Quick Set Up Kit. By combining the S&S Teardrop air intake and the S&S performance designed slip-on mufflers, you can potentially bolt about 10-12hp onto a bike in an hour or so. The kit includes jets for the stock CV carb, and S&S recommends you verify the fuel calibration on injected motorcycles.
Now Available On the Other Side
GMA Engineering (402) 330-5105
http://www.gmabrakes.com
The BPST Brake Pulley System from GMA Engineering is now available in a right-side-drive version. GMA mirrored the caliper-mounting bracket to work on custom and modified bikes that are running the Baker RSD transmission. The combination of these two components works well when installing 250mm and 300mm tires in custom frames. The brake pulley comes completely assembled, and it will include a weld-on frame tab and universal braided stainless brake line.
Slugger Risers
Nash Motorcycle Company
(360) 693-4225
http://www.nashmotorcycle.com
The Nash Motorcycle Company machined aluminum Slugger riser is available in 2-, 4-, and 6-inch lengths with an 8-inch rise. They are designed for tall ape hangers and the risers clamp down for extra gripping surface. The result is no more movement in your 18-inch apes, or even better, your "Gimp Hangers."

Rewire, Custom or Stock
Centech (610) 754-0720
http://www.centechwire.com
The CMC-1 kit from Centech was designed to wire custom motorcycles, but it can be used to rewire stock bikes for a cleaner look. The high temperature, abrasive-resistant wire is designed to be hidden inside the frame for a uncluttered look. Each wire is labeled along with its length for easy identification. To add longevity, a specially sealed starter relay is included with a miniature circuit breaker panel mounted on rubber insulators to protect your wiring job. Special watertight connectors are included to allow for easy removal and maintenance for your running and signal lamp. An optional stainless steel cover is available for the circuit breaker unit. Harness kits for the Twin-Cam motors are optional.

Attention Getting
Muth Mirror Systems (800) 844-6616
http://www.muthco.com
Muth Mirror Systems' Signal Mirrors are a safety accessory engineered for Harley-Davidson models. The turn indicator activates an attention-getting red LED-flashing chevron "Through-The-Glass" of the corresponding signal mirror to alert drivers in the blind spots. Amber LEDs have the dual function of operating as running lights and as a Forward Face signal. When hazard lights are used, signals flash in both mirrors. The signal mirror housings are machined from 6061 billet aluminum and finished in chrome. The mirror measures 3-1/2 inches high, 5-1/2 inches wide, and 3/4-inch deep.

Go LED Extreme
Hitech LED Products (818) 887-0136
http://www.hitechledproducts.com
Go Hitech extreme by installing the Evil drive. The beltdrive is supported with outer support bearings on the clutch basket and engine pulley, which makes this unit completely rigid under torque. All beltdrives come with show-quality polish and everything needed for assembly, including the Scorpion clutch. Available for '90 and later Softails, Dyna Glides, and Twin-Cams, the beltdrives are available in 4-, 5-, 6-, and 7-inch sizes.
Python Performance
Drag Specialties
http://www.dragspecialties.com
Drag Specialties' Python Performance Starter Motors feature a heavy-duty starter clutch and a polished billet end cover with a machined Python logo. The largest of stroker motors can be started with 1.5W of power. They are available finished in chrome, gloss black, black wrinkle, and natural finish and come with a full 12-month warranty. All starters are test run and come with a test data sheet.
Handcrafted Storm
MGS Custom Bikes (651) 951-9878
http://www.mgscustombikes.com
The latest pipes to blast out of MGS Custom Bikes are the Sandstorm. The handcrafted 2-1/4-inch pipes bolt right onto your custom, Big Dog, as well as several other right- and left-side drive applications.